Ge Sunsmart Model 32787 Users Manual

GE Appliances' owner's manuals page offers specific use and care guides and installation instructions on GE Appliances as well as Quick Specs and Energy Guides. Enter your appliance's model number to download owner's manuals, use and care manuals, installation information and energy guides.

  1. Ge Sunsmart Model 32787 Users Manual Download
  2. Ge Sunsmart Model 32787 Users Manual Pdf
  3. Ge Sunsmart Model 32787 Users Manually
  4. Ge Sunsmart Digital Timer 32787 Manual
  5. Ge Sunsmart Model 32787 Users Manual Online

Sunsmart Digital Timer 32787 Ge Sunsmart Timer Manual GE Appliances' owner's manuals page offers specific use and care guides and installation instructions on GE Appliances as well as Quick Specs and Energy Guides. Enter your appliance's model number to download owner's manuals, use and care manuals, installation information and energy guides. GE Appliance - Download a Copy of Your Owner's Manual or Installation Instructions. You can find your appliance's installation instructions and/or learn about the use.

DST (Daylight Savings Time)

1. To activate DST press both of the “HOUR” and “MIN” keys at the

Jan 13, 2018 How to Program A Defiant Indoor In Wall Digital Timer model 32648 - Instructions The GE SunSmart in-Wall Digital Timer, Push Button, Backlit LCD. Jan 13, 2018 Defiant In Wall Digital Timer Review model 32648 - A simple and easy to use timer. In this video I review the features and specifications of the Defiant in wall, 7 day programmable, daylight. Sep 06, 2012 15312 Initial Setup (part 1 of 5) - GE SunSmart Timer Jasco Products Company. The GE SunSmart Timer also includes a random security feature that varies on. Sep 04, 2012 Watch this video to learn how GE Digital Timers automate lights using easy-to-program preset options or custom time settings. This digital timer uses.

GE Digital In-Wall SunSmart Timer, 3-Way, Screw Terminals. SunSmart™ Digital Timer Installing the timer on the LOAD Side 1. Using the Load Side of Figure 3 as a visual reference, remove the LOAD Side 3-way switch and the four wires, labeling the wire removed from the common terminal as LOAD (4) and the wires from the HOT terminals (H) as Traveler-1 (5) and Traveler-2 (7).

same time. The present time will increase by an hour and the
screen will
show “DST”

2. To de-activate DST press the “HOUR” and “MIN” keys at the same

time. The “DST” will no-longer be on the screen.

Random, on/off Setting:

This feature sets the timer to switch lights ON and OFF at random
intervals while you are out of the house. This function will only
operate if one or more programmed switching commands are set.
1. To activate press the “DAY” and “HOUR” keys at the same time.

Once activated the “TIMER” symbol will be blinking.

2. To de-activate press the “DAY” and “HOUR” keys at the same time

again. The “TIMER” symbol will no longer be on the display.

Reviewing Programs:

1. To review the programs that have been entered, press and release

the “PROG” key. Each time you do this you will be able to scroll
thru the programs.

2. Any program can be edited by pressing the “HOUR”, “MIN”, and

“DAY” keys. Then press the “PROG” key in order to accept the
changes.

3. When complete press the “CLOCK” key to return to current time

and day.

Deleting Programs:

1. To delete a particular program simply press the “PROG” key until

the desired program is displayed.

2. Then press the “HOUR” and “MIN” keys until --:-- is displayed.

Then press the “PROG” key in order to delete this particular
program.

3. When complete press the “CLOCK” key to return to current time

and day.

Electrical Ratings:

120VAC 60Hz
15A Resistive
15A Tungsten
1HP

*When done programming,
close door.

Manual Override:

Pressing the door will override the timer setting and will manually
turn the switch ON and OFF.

NOTE:

When you initially program the unit it may be necessary to press the
manual override key as the unit will not look back to determine if it
should be ON. For example if the current time is 2:00PM and you just
programmed the unit to turn ON at 1:00PM, you will need to press
the manual override key to turn it ON. Thereafter, the unit will resume
normal operation (automatic).

Do not use a metallic object to adjust this timer. Always use a
non-metallic object such as a wooden pencil.

MEMORY BACK UP:

This timer is equipped with a rechargeable Ni-Mh battery which will
protect your programs during power failure for up to 30 days.
No need to replace battery.
Note that the screen blanks if the battery is discharged completely.

is a trademark of the General Electric Company and is used
under license to Jasco Products Company LLC, 10 E. Memorial Road,
Oklahoma City, OK 73114.
This Jasco product comes with a 1 year limited warranty.
Visit www.jascoproducts.com for details.

Smart Digital Timer

Installation Instruction

1. Turn OFF the main power at the circuit breaker.
2. Remove the existing switch.
3. Connect the wires of Timer and wall box as followed by using the wire

nuts provided.
a) Connect the Hot/Live wire of main power to the Black wire from Timer.
b) Connect the Neutral wires to the White wire from Timer. Often, the
neutral wire can be found in the back of the wiring box bound in a
wire nut.
c) Connect the Hot/Live wire of Load to the Red wire from Timer.
d) Connect the Ground wire to the Green wire from Timer.
Note: Be sure that all wire nuts are secure.

4. Tuck the wires into the wall box leaving room for the Timer. Using the

screws provided, mount the timer to the wall box being careful not to
crush any wires.

5. Place wall-plate over timer and screw in to place using screws provided
6. Turn Main power ON

POWER-UP SEQUENCE:

1. Lift up the bottom of the door using a small slotted screwdriver.
2. Position the slide switch to TIMER.
3. Press the “RESET” button using an insulated tool such as a toothpick.
4. The display should flash 12:00AM on Monday.

Setting Current Time:

1. Press and HOLD the “CLOCK” key during this entire procedure.
2. Press the “HOUR” key to advance the hours.
3. Press the “MIN” key to advance the minutes.
4. Press the “DAY” key to advance the day.
5. If any keys are pressed for a prolonged period, the display will

advance rapidly.

6. Release the “CLOCK” key once the time and day have been entered. Now

Ge Sunsmart Model 32787 Users Manual Download

the timer is in operation and ready to be programmed. The colon “:” after
the hours will continuously flash indicating that the clock is running.

Programming ON/OFF Events:

1. Press the “PROG” key once. TIMER 1 on - - : - - appears.
2. Using the “HOUR” and “MIN” keys enter the desired ON time. See block

programming below for selecting different days of the week.
When complete press the “PROG” key once.

3. Timer OFF --:-- will be displayed. Using the “HOUR” and “MIN” keys

enter the desired OFF time. See block programming below for selecting
different days of the week. When complete press the “PROG” key once.

4. If complete press the “CLOCK” key to return to current time

and day.

5. Note that a total of 7-ON and 7-OFF events can be programmed.

Block Programming:

1. When programming ON/OFF events, all days are indicated by default.

To change the day selection simply keep pressing the “DAY” key and the
display will change as follows:

Ge Sunsmart Digital Timer Instructions

a) Monday - Sunday (Default)

b) Individual Days (Only select 1 day)

c) Monday - Friday

d) Saturday and Sunday

e) Monday - Saturday (Off Sunday)

f) MO, WE, FR

g) TU, TR SA

h) MO, TU, WE

i) TR, FR, SA

15071

= Wiring Nut

Typical Wiring Schematic

Black

Black

Light

White

White

White

Red

Green

Ground

Timer

120 VAC

Power

Source

LOAD

LINE

GROUND
TIMER-GREEN
WALL-BARE

NEUTRAL
[WHITE]

LINE
[BLACK]

LOAD
TIMER-RED
WALL-BLACK

15071

Manual Version 2

01-24-2010

www.jascoproducts.com

If you are unsure or unclear about this instalation, contact a qualified
licensed electrician.

Advertising
Popular manuals

Programming On/Off Events: (up to 4 ON/OFF program)
1. Push “Setup/PGM” twice. “P1” will flash on screen.
2. Push + or - to choose the desired program to change, or start at “P1 ON.”

Push enter to confirm which program P1, P2, P3, or P4 you are setting.

3. Push + or - to choose between “set” or “del” program. Push enter to confirm.
4. Push + or - to choose the desired days you would like the timer to activate.

The options are;
• S, M, T, W, Th, F, S (All days)
• S, S (Weekend)
• M, T, W, Th, F (Weekdays)
• M through S: (Individual days)
• T, Th
• M, W, F
Push enter to confirm the days of week setting.

5. Push + or - to choose the desired hour. Push enter to confirm.
6. Push + or - to choose the desired minute. Push enter to confirm.
7. After completion of steps 1 to 6 the ON time and days selected are

complete. Repeat steps 4 to 6 to set the OFF time for the program.

8. Once ON and OFF for a program is chosen the timer will ask you to “save”

- push enter to save program, then continue to set other programs. When
finished programming push Setup.

Note: The display will show “AUTO” to alert you a program is running.
*When done programming, close door. You cannot exit during a program cycle.

Using Random Feature: The random feature will turn lights on and off using
the programmed times + or - 30 minutes. This gives your house a more lived in
appearance.

1. Push the random button to activate random feature. The screen will change

from “AUTO” to random. Screen will display “RDM”

2. Push the auto button to deactivate random mode. Screen will display “AUTO”

Ratings:
120VAC 60Hz
Incandescent (Tungsten): 5A/600W
Resistive: 15A/600W
Maximum Temperature: 40°C

Manual Override:
Manual override will not effect programing.
Pressing the door will override the timer
setting and will manually turn the switch ON
and OFF.

Memory Back Up: This timer is equipped
with memory back up that will protect the
settings for up to 60 minutes. You never have
to replace batteries. The internal backup
requires about 12 hours to fully charge.

ON - OFF Slide Switch: Turns power to the
timer ON or OFF. In “OFF” position timer will
not function manually or automatically.

ON = Power to timer & fixture.
OFF = No power to timer or fixture.
For normal operation leave in the on
position.

Digital Timer

If you are unsure or unclear about this installation, contact

a qualified licensed electrician. Not for use with CFL or

fluorescent bulbs. Use with incandescent, xenon, halogen.

Aug 01, 2019 The Agilent 7800 ICP-MS is an easy to use robust quadrupole inductively coupled plasma - mass spectrometer (ICP-MS) designed to simplify routine ICP-MS analysis. With high matrix tolerance, wide dynamic range, and effective control of polyatomic interferences using helium mode with kinetic energy discrimination (KED). It takes the uncertainty out of analyzing. Agilent 7800 icp-ms operator manual.

Safety ground (green) must be connected for proper

operation.

Installation Instruction
1. Turn OFF the main power at the circuit breaker.
2. Remove the existing switch.
3. Connect the wires of the timer to the wall box as shown in

Figure 1 and

Figure 2 using the wire nuts provided.
a) Connect the line wire to the black wire from Timer.
b) Connect the load wire to the blue wire from Timer.
c) Connect the ground wire to the green wire from Timer.

Note: Be sure that all wire nuts are secure.

4. Tuck the wires into the wall box leaving room for the timer. Using the screws

Ge Sunsmart Model 32787 Users Manual Pdf

provided, mount the timer to the wall box being careful not to crush any
wires.

5. Turn main power ON at the circuit breaker.

POWER-UP SEQUENCE: If you don’t see the numbers on the screen you will
want to verify the unit is wired correctly, the unit is getting power, and the bulb
in the fixture is good.

Verify the Power slide switch inside the button is set to the ON position. See

Figure 3.

Ge Sunsmart Model 32787 Users Manually

Note: If the timer has no display check the bulb first to make sure the light bulb
is screwed in tight and not burned out. A working light bulb must be installed
to complete the circuit.

1. Open the door by inserting a fingernail or screwdriver in the space provided

at the top of the door and pulling forward. See

Figure 4.

2. Position the Power switch to ON (To Right Side). Display will not appear until

switch is on. See

Figure 3.

3. Push and hold the RESET button for 3 seconds. The word Reset will appear

on the screen.

NOTE: When adjusting settings on timer, always use a non-

metallic, insulated tool such as a toothpick or wooden pencil.

4. The display should flash 12:00 am.

Setting Current Day & Time:
1. Push Setup/PGM once, date will appear on screen.
2. Push the + or - to move the arrow under the current day of the week (S, M, T,

W, T, F, S). Press enter to confirm. See

Figure 5. Hour will appear on screen.

3. Push the + or - to scroll through the Hours. Press enter when the correct

hour is found, minutes will appear on screen. Press the + or - to scroll
through the minutes. Press enter when the correct minute is found to
confirm setting. Be sure (AM/PM) is correct. This is located in the lower left
portion of the display.

15313

03-10-2011

www.jascoproducts.com

Typical Wiring Schematic

Black

Black

Load

White

White

Blue

Line

= Wiring Nut

Ground

Green

Timer

Figure 1

Figure 3

Figure 4

Figure 5

Figure 2

Green

Blue

(Load)

Black

(Line)

Black

Black

Ground

Advertising

Sunsmart Digital Timer 32787

Ge Sunsmart Timer Manual

Popular manuals

Download Instruction manual of GE Indoor SunSmart Timer for Free or View it Online on All-Guides.com.

Brand: GE

Category: Timer

Type: Instruction manual for GE Indoor SunSmart

Pages: 2

SunSmart
Wireless Timer System
Wireless Battery Operated Timer
1. On the back of the wireless timer, remove the plastic tab keeping the battery from making
connection. You may need to remove the battery door if the tab doesn’t pull out easily.
A. If the clock has not started, remove the batteries and reinstall them following the “+” and “–”
polarities, ensuring they match the marked information within the battery housing.
B. Replace the plastic battery door ensuring that it snaps back into place.
1. Plug in the light or electronic device you wish the wireless timer to control into your
2. Plug the receiver module into your wall outlet.
3. Make sure your light/device is turned to the On position. The lamp or device should not turn on.
NOTE: If no buttons are pushed for 30 seconds while in programming mode, the timer
will default back to the clock screen. Push the Time button until you return to the step
1. Press RESET button on your wireless battery operated timer using a toothpick or a pencil
2. Press the Time button once, and the year will be blinking. Press the Up or Down button to set the
3. The month will be blinking. Press the Up or Down button to set the current month then press
4. The day will be blinking. Press the Up or Down button to set the current day then press
5. Daylight Savings Time (DST) needs to be set next. DST with On blinking will be displayed. If your
area observes DST, then press the Time button and move to the next step. If your area does not
observe DST, then set it to Off by pressing the Up or Down button and press the Time button to
NOTE: DST will automatically reset the times in the timer to match the current time change, if DST
is set to On. The default DST time change is 2:00 am, the second Sunday of March, and then the
6. Next step is to set the current time. The hour should be flashing, press the Up or Down button to
select the current hour ensuring that AM/PM is correct then press the Time button.
7. The minute should be flashing, press the Up or Down button to select the current minute then
SETTING THE SUNSMART™ FEATURE
1. NOR (North) will be flashing on your screen, press the Up or Down button to choose your location.
B. CEN (Central)
2. Press the Time Button once you have chosen your correct location.
3. Your programmed sunrise time will now be on your screen with the time blinking. If the time is
correct, press the Time button and continue to the next step (If the time is not correct, press
the Up or Down button to fine tune the correct time the sun rises in your location then press
4. Your programmed sunset time will now be on your screen with the time blinking. If the time is
correct, press the Time button and continue to the next step. (If the time is not correct, press
the Up or Down button to fine tune the correct time the sun rises in your location then press
5. Your timer should now be returned to the clock screen showing the current time.
NOTE: If no buttons are pushed for 30 seconds while in programming mode, the timer
will default back to the clock screen. Push the Program button until you return to the
correct program you were setting, then press the Time button to return to the correct
step where the timer reset (you can scroll through all 7 On/Off programs by pushing
1. Press the Program button to begin setting the times you wish your connected light or electronic
2. “-- -- 1 ON” will be on the screen, press the Time button to program your first On program time.
3. The day of the week will be flashing, press the Up or Down button to choose the days you wish
A. Monday thru Sunday
C. Monday thru Friday
E. Monday, Wednesday & Friday
4. Press the Time button once you have chosen the days of the week you want to control the device.
5. The hour will now be blinking. You have three options to choose from:
A. Sunset time: Press the Down button once to choose your pre-programmed sunset time or
scroll untill the preset programmed time shows on the screen. If you choose to use the pre-
programmed sunset time, press the Time button and then press the Program button to move
B. Sunrise Time: Press the Down button a second time to choose your pre-programmed sunrise

Ge Sunsmart Digital Timer 32787 Manual

time or scroll untill the preset programmed time shows on the screen. If you choose to use the
pre-programmed sunrise time, press the Time button and then press the Program button to
C. Custom Time: Pressing the Down button a third time or scrolling with the Up button will let you
i. If you chose to use a custom time, the hour will be blinking. Keep pressing the Down button
to choose the hour you wish the timer to turn on (keeping in mind AM/PM). Press the Time
ii. The minute will now be blinking, press the Up or Down button to choose the minute then
iii. Press the Program button again to program your first Off program time.
6. The screen should read “-- -- 1 OFF”. Repeat the previous steps above for choosing your days of
7. Repeat these steps for up to 7 different programs setting as many On/Off cycles as desired. At any
time, push the On/Off button to complete programming and return to clock mode.
Press the Program button until you get to the program you would like to delete. Press the
Mode/Resume button and the program setting will be deleted.
•AUTO: Timer functions using all programs you have set.
•RDM (Random): Timer uses all programs you have set +/- 30 minutes of On/Off times
•None (Manual mode): Timer does not use programs at all and is only on manual mode.
1. Simply press the On/Off button to override timer programs to turn your lights or devices On/Off.
2. If timer is in AUTO mode, it will follow the next timer program setting to turn your light or
3. If the timer is in RDM (Random) mode, it will follow the next timer program setting to turn your
4. If the timer is in Manual Mode (Blank on your screen not showing AUTO or RDM), then the light or
device will stay On/Off until you change your timer mode option or you manually use the On/Off
This device complies with part 15 of the FCC rules. Operation is subject to the following

Ge Sunsmart Model 32787 Users Manual Online

two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could void the
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encourage to try to correct the interference by one or more of
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
•Consult the dealer or an experienced radio/TV technician for help.
See www.jascoproducts.com for troubleshooting and frequently asked questions (FAQs).
Manual
ALASKA
NORTH
CENTRAL
SOUTH
•DO NOT USE WITH AN EXTENSION CORD
• KEEP CHILDREN AWAY
• DO NOT USE IN WET LOCATIONS
RISK OF FIRE
• DO NOT USE TO CONTROL APPLIANCES
APPLIANCES, HEATERS, IRONS, ETC.)
BATTERIES MAY LEAK HARMFUL LIQUIDS OR IGNITABLE
PRODUCT DAMAGE
• REPLACE ALL BATTERIES AT THE SAME TIME
• REMOVE BATTERIES IF PRODUCT IS TO BE UNUSED FOR
CAUTION
- Scroll through
Time
- Press to confirm choices
USE PENCIL OR TOOTHPICK TO RESET ALL SETTINGS.
- Toggle between Auto, Random
- In programming mode, deletes
Program
programming.
On/Off
within range On/Off
in programming mode.
125V 60 Hz:
15A Resistive
1/3HP
120VAC 60 Hz:
MADE IN CHINA
GE is a trademark of General Electric Company and is under
license by Jasco Products Company LLC, 10 E. Memorial Rd.,
This Jasco product comes with a 1-year limited warranty.
Visit www.jascoproducts.com for warranty details and
Questions? Contact us at 1-800-654-8483 between
AC POWERED RECEIVER OUTLET
26684 VERSION 01
GE5399R

Related Products for GE Indoor SunSmart

Related Manuals for GE Indoor SunSmart

GE Indoor SunSmart: Frequently viewed Manuals